What causes half of the strand of outdoor Xmas lites to not work?Am I putting too many strands together? - miniature bulbs
Every year I have the lamps outside the (100 lites per hectare) each year and ends with more than half of the satellite channels through the production line. I associate myself with 10 strands per outlet. Is this my problem?
Thursday, January 7, 2010
Miniature Bulbs What Causes Half Of The Strand Of Outdoor Xmas Lites To Not Work?Am I Putting Too Many Strands Together?
5 comments:
Another problem is that the string of Christmas lights, consisting of two channels (typically 2 or 3). A short circuit could receive and become a part of the string. Check the bulb (in a previous reply message), do the backup in the management chain. if they do not work, is probably cheaper than buying a new set of lights, wasting the time to find what is wrong.
No bulbs should be clear.
Well, that's one reason, because a few lights went out, or you need to warm up. (it happened), or you can adjust the wick to work.
You got it, you're overloading the lights. Normally it says on the box of lights, you should not connect more than 3. Now that I am now, I've never been a problem.
Check the lamps at each end of the section is not lit. You probably have a bad lamp, are divided into sections. It offers a moreover, that is clear, replace with a touch of red.
Post a Comment